Cisco Nexus V9P 200Gigabit Ethernet Card

  • Part: 2321229
$9,651.00
FREE DELIVERY

Availability

Out of Stock

Highest-density network application card

The Cisco Nexus® SmartNIC+ V9P is an FPGA-based network application card, optimized for low latency and high density.

The device packs a powerful 16nm Xilinx Virtex UltraScale Plus (VU9P) FPGAs with 2.5M logic cells, into a compact, half-height, half-length, PCIe 16x form factor.

High-capacity and low-latency memory

An extensive memory hierarchy for complex, memory-intensive applications

The Xilinx VU9P FPGA (Field Programmable Gate Array) features 75Mbit of block RAM and 270Mbit of UltraRAM on chip. The Cisco Nexus SmartNIC+ V9P further incorporates an additional 9GB of DDR4 DRAM on the board for high throughput access. The DRAM is accessible via a 72-bit-wide bus for maximum performance.

High-bandwidth connectivity

Dual QSFP-DD ports provide up to 400Gbps of full duplex connectivity.

The dual QSFP-DD ports offer high-speed 4x40GbE or 2x200GbE connectivity. Using QSFP-DD breakout cables expands the connectivity to 16x10GbE/25GbE4 connections. This high-density connectivity enables a range of high-performance, directly connected network applications, bypassing the need for traditional switching and multiplexing requirements.

Extensive IP library

Cisco is a specialist in low-latency, high-performance FPGA IP cores.

We provide you the same high-speed, low-latency IP blocks used in our market leading products, including:

  • 10GbE PCS/MAC with ultra-low-latency performance
  • Low-latency, high-throughput PCIe DMA engine
  • Timing, signaling, and register interfaces, including I2C
  • Packet field extractor and frame multiplexer (with source code)
  • Asynchronous FIFO and CDC modules (with source code)

Several example designs are also provided to help get design work started and completed quickly.

Integrated software library

A standard Linux driver as well as transparent TCP and UDP acceleration and low-level packet access.

The Cisco Nexus SmartNIC+ V9P functions out of the box as a high-performance network adapter. The entire SmartNIC software library is available, including the ExaSOCK sockets application acceleration system and the libexanic direct user-space access API. Libexanic provides easy support for low-latency packet TX/RX, managing the FPGA state (through register access), and low-latency TCP/UDP delegated sending of operations for hybrid hardware/software applications. The Cisco Nexus SmartNIC+ V9P also supports fast and easy firmware updates (without requiring reboots) and vital statistics monitoring (temperatures, light levels, etc.).

  • General Information
    • Manufacturer
    • Cisco Systems, Inc
    • Manufacturer Website Address
    • http://www.cisco.com
    • Brand Name
    • Cisco
    • Product Line
    • Nexus
    • Product Type
    • 200Gigabit Ethernet Card
  • Warranty
    • Limited Warranty
    • 1 Year

  • Interfaces/Ports
    • Host Interface
    • PCI Express 3.0 x16
    • Total Number of Ports
    • 2
  • I/O Expansions
    • Expansion Slot Type
    • QSFP-DD
  • Media & Performance
    • Media Type Supported
    • Optical Fiber
  • Network & Communication
    • Network Technology
    • 100GBase-SR4
    • 40GBase-SR4
    • 40GBAse-LR4
    • 100GBase-LR4
  • Physical Characteristics
    • Form Factor
    • Plug-in Card
    • Height
    • 2.7"
    • Width
    • 6.6"
  • Miscellaneous
    • Environmentally Friendly
    • Yes
    • Environmental Compliance
    • Waste Electrical and Electronic Equipment Directive (WEEE)